Server Technology PT40 Manual de instalación descargar pdf (Pagina 78)

78 • Advanced Operations Smart Cabinet Distribution Unit

Installation and Operations Manual

Upload/Download Process

GETting a configuration file (Download):

1. Open the FTP client.

In a Windows environment, in the Run window type ftp and press Enter.

2. At the prompt, type open, followed by the IP address of the Sentry and press Enter.

FTP> open 12.34.56.78<Enter>

3. Authenticate with the appropriate administrative username and password.

4. At the prompt, type get, followed by the filename and press Enter.

FTP> get config.bin<Enter>

5. At the prompt, type close to close the connection to the Sentry.

FTP> close

PUTting a configuration file (Upload):

NOTE: Uploading the CONFIG.BIN file takes considerably longer than the NETWORK.INI file.

When uploading both, Server Technology recommends uploading the NETWORK.INI file first.

1. Open the FTP client.

In a Windows environment, in the Run window type ftp and press Enter.

2. At the prompt, type open, followed by the IP address of the Sentry and press Enter.

FTP> open 12.34.56.78<Enter>

3. Authenticate with the appropriate administrative username and password.

4. At the prompt, type put, followed by the filename and press Enter.

FTP> put network.ini<Enter>

5. At the prompt, type close to close the connection to the Sentry and force a restart of the

device.

FTP> close

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 89 90

Sin comentarios

Server Technology PT40 Manual de instalación Pagina 78