Server Technology PT40 Manual de instalación descargar pdf (Pagina 19)

Smart Cabinet Distribution Unit Operations • 19

Installation and Operations Manual

Changing a user’s access privilege level:

The Sentry has the following defined privilege levels:

• Admin: Full-access for all configuration, control (On, Off, Reboot), status and

serial/Pass-Thru ports.

• User: Partial-access for control (On, Off, Reboot), status and Pass-Thru of assigned

outlets, groups and serial/Pass-Thru ports.

The administrator may also grant administrative privileges to other user accounts allowing the Sentry to

have more than one administrative-level user.

NOTE: You cannot remove administrative privileges from the Admn user unless another user has already been given

administrative access level privileges created.

Click on the Edit link in the Action column for the associated user.

On the subsequent User Edit page, select Admin or User from the Access Level drop-down menu and

press Apply.

Adding and Deleting serial port access:

Click on the Ports link in the Access column for the associated user.

On the subsequent User Ports page, select or deselect ports to be accessed by the user and press Apply.

FTP

The FTP configuration page is used for setup and maintenance of all settings required to perform an

FTP firmware upload, configure automatic FTP updates or system configuration uploads/downloads.

See

Appendix B: Uploading Firmware for more information on uploading firmware.

Setting the FTP Host Address:

Enter the IP address or hostname in the Host field and press Apply.

Setting the FTP username:

Enter the FTP server username in the Username field, and press Apply.

Setting the FTP password:

Enter the FTP server password in the Password field, and press Apply.

Setting the filepath:

Enter the path of the file to be uploaded in the Directory field, and press Apply.

Setting the filename for upload:

Enter the filename of the file to be uploaded in the Filename field, and press Apply.

Testing the FTP upload configuration:

This test validates that the unit is able to contact and log onto the specified FTP server, download the

firmware file and verify that the firmware file is valid for this unit.

Press Test.

Enabling or disabling automatic updates:

The Sentry features the ability to schedule automatic firmware updates. When enabled and configured,

the Sentry will regularly check the FTP server for a new firmware image and upload it.

Select Enabled or Disabled from the drop-down menu and press Apply.

Setting the automatic update scheduled day:

Select the desired day for the automatic update from the drop-down menu and press Apply.

Setting the automatic update scheduled hour:

Select the desired hour for the automatic update from the drop-down menu and press Apply.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 89 90

Comentarios a estos manuales

Sin comentarios

Server Technology PT40 Manual de instalación Pagina 19

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Server Technology PT40