Server Technology PT40 Manual de instalación descargar pdf (Pagina 77)

Smart Cabinet Distribution Unit Advanced Operations • 77

Installation and Operations Manual

Upload/Download

The Sentry family of product supports the ability to upload and download system configurations using a

standard FTP client. This feature enables for backup and restoration of system configuration as well as

upload of ‘template’ configurations to ease large initial equipment deployments.

Upload/Download Command Summary

Command Description

Set FTP Server Enables or disables the FTP server

Show FTP Displays FTP configuration information

Sentry Integrated FTP Server

The Sentry supports an integrated FTP Server which must be enabled for Upload/Download support.

The Sentry FTP Server supports a single user at a time. Once an administrative user has authenticated

with the Sentry FTP Server, standard FTP client commands may be used to upload or download Sentry

configurations.

NOTE: The integrated FTP Server does NOT support web browser FTP file transfers.

A non-web-browser is required for all Upload/Download requests.

Enabling and disabling the FTP server:

The Set FTP Server command is used to enable or disable the integrated FTP server.

To enable or disable the FTP server:

At the Smart CDU: prompt, type set ftp server, followed by enabled or disabled and press Enter.

FTP Configuration Files

The Sentry FTP server supports upload/download of two configuration files: CONFIG.BIN and

NETWORK.INI. These files may be uploaded or downloaded using FTP PUT and GET operations.

• CONFIG.BIN This file contains the entire configuration of the Sentry

excluding TCP/IP

settings, serial/factory-only configurations, the x.509 certificate (SSL) and

SSH keys. This file in encoded to keep all data (including usernames,

passwords etc.) out of plain view. This file is NOT editable.

• FTP.INI This file contains

only the FTP settings (FTP Host, username, password,

filepath, filename and automatic updates support). This file is user

readable and editable ‘plain text’ file.

• NETWORK.INI This file contains

only the TCP/IP settings (IP address, subnet mask,

gateway, DNS1 and DNS2). This file is user readable and editable ‘plain

text’ file.

• SNTP.INI This file contains

only the SNTP settings (SNTP Hosts and GMT offset).

This file is user readable and editable ‘plain text’ file.

NOTE: The CONFIG.BIN file while encoded is not encrypted and susceptible to decoding using simple tools.

Server Technology recommends the secure storage of CONFIG.BIN backup images.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 89 90

Sin comentarios

Server Technology PT40 Manual de instalación Pagina 77