Server Technology PT40 Especificaciones descargar pdf (Pagina 8)

Connecting to the Unit

Serial (RS232) port

The Commander is equipped with an RJ45 Serial RS-232 port for attachment to a PC or networked

terminal server using the supplied RJ45 to RJ45 crossover cable and RJ45 to DB9F serial port adapter

as required. See Power Ratings in Appendix C: Technical Specifications for more information on the

Serial RS-232 port.

Ethernet port

The Commander is equipped with an RJ45 10/100Base-T Ethernet port for attachment to an existing

network. This connection allows access to the Switched Commander via Telnet or HTML.

The Commander is configured with the following network defaults to allow unit configuration out-of-

the-box through either Telnet or HTML:

• IP address: 192.168.1.254

• Subnet Mask: 255.255.255.0

• Gateway: 192.168.1.1

The local PC network connection must be configured as noted below:

NOTE: Contact your system administrator for instructions in reconfiguring the network connection. Reconfiguration of

your network connection may require a restart to take effect.

• IP address: 192.168.1.x (where x is 2-253)

• Subnet Mask: 255.255.255.0

Modem port

The Commander is equipped with a DB9 male Modem serial port for connection to an external modem

using the supplied DB9 female to DB25 male serial cable. See Power Ratings in Appendix C:

Technical Specifications more information on the Modem port.

8 • Installation Sentry Commander - PT40

Installation and Operations Manual

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 73 74

Sin comentarios

Server Technology PT40 Especificaciones Pagina 8